Sign in

Subscribe to newsletter

(0)

Switch country/language: Deutschland (Deutsch)

Switch country/language: United Kingdom (English)

Front and back side

Front and backside, an interface for accessory extensions

GoShell_beschriftet_Front_EN_c

GoShell_beschriftet_Back_EN_v2_c

	The eight embedded, integrally-cast nuts (brass) on the back can be used to fasten screws directly to the Shell case. Also, the embedded nuts near the corners can be used to attach hand straps and similar accessories.
	On the four central embedded nuts, it is possible to fasten the RAM-202 securely to the Shell. When fastened this way, the RAM-202 remains permanently fixed to the case. This is useful for theft-protection purposes, but it means that quick removal isn't possible anymore. With this important accessory (RAM-202) it is possible to make use of practically the entire RAM Mount system for mounting in vehicles, boats or on various objects. More about mounting possibilities can be found here.
	With the Quicksnapper it is possible to detach the Shell from the mount in a matter of seconds without having to undo any screws. The Quicksnapper can also be combined with the RAM-202. Quicksnappers are available for all variants of the Shell.
	The Car Cradle is compatible with the RAM-202 as well, or it can also be screwed on directly. The car cradle also offers the option of a charging function. (actual product may differ from photo)
	Suitable for all Shell models, easily removable: the length-adjustable hand strap can be attached to different places with its two attachment points. This means that it can also be used simultaneously with the shoulder strap. The aiShell™ 10, 9.7, Air, mini and mini+ even floats thanks to the use of two hand straps at the same time. A hand loop and a shoulder strap can also be attached at the same time. The simultaneous use of the Quicksnapper or the Car Cradles remains possible.
	The shoulder strap can also be attached to the sprue nuts. It can be removed without tools. Two shoulder straps can also be combined with each other. So the aiShell™ can be worn like a vendor's tray.
	On the back of the aiShell™ mini there is a holder for the display flap. It can be safely stowed there when not in use. The ergonomic design is maintained by the recessed grips. If the display lid is on the back, all other accessories such as the Car Cradle can still be used at the same time.
	The rubber feet on the back are screwed to the cast-in nuts, which provides an optimal hold. (Only for aiShell™ 9.7 and aiShell™ 10)
	We have developed Magnetic Feet to widen the scope of applications for Shell. After removing the standard Rubber Feet, the Magnetic Feet can be mounted on the back. They are strong enough to securely attach Shell to ferromagnetic surfaces. Unlike commercially available magnets, this accessory is protected with a foil against water penetration and damage to the magnet’s surface. It also prevents Shell from slipping on a metal surface.